Setting Date And Time - Hitachi DZ-MV730A Instruction Manual

SETTING DATE AND TIME

Set the current date and time so that the date and time you make a recording can be recorded
correctly.
The following procedure can also be used to correct the date and time you have already set.
1
Turn the DVD video camera/recorder on.
2
Press the MENU button.
The menu screen will
appear.
3
Use the f/e/d/
c buttons to choose
"Date Setup" and then
"Date Set".
4
Press the c button.
The figure for the
month will be selected.
[The digit that is
highlighted first
depends on the date
display format (set up in Date Mode): The
digit on the left end of the date display will
be first highlighted.]
:
Note
After setting the figure for the month, press the c
button to right to select the digit to be set. If you
press the A button after selecting the figure for
the month, the screen for verifying the set date will
appear instead of screen for setting day, year or
time.
MENU
5
Came r a F u nc t i on s Se t u p
P r o g r am AE : A u t o
Wh i t e Ba l . : A u t o
E I S : On
D i g . Zo om : 4 0 x
M IC . F i l t e r : O f f
ENTER RETURN RAM
Da t e Se t u p
Da t e Se t 1 / 1 / 2005
Da t e Mode 1 2 : 00AM
6
ENTER RETURN RAM
Da t e Se t u p
Da t e Se t 1 / 1 / 2005
Da t e Mode 1 2 : 00AM
7
ENTER RETURN RAM
Note
This DVD video camera/recorder incorporates a
rechargeable battery to store the date and time in
memory. If this built-in battery is exhausted, the date
and time will be reset. To prevent this, connect the AC
adapter/charger to DVD video camera/recorder every 3
months, and leave them for at least 24 hours with the
DVD video camera/recorder turned off: The built-in
battery will be charged.
Use f / e / d / c buttons
to select, and then press A to
designate.
Press the d or c
button to select the digit
you want to set in
sequence.
Press the f or e
button to select the
number for current date/time, and then
repeat step 5 to set the current date and time.
:
Note
To stop date/time setting midway, press the C
button.
After setting the current
date and time, press the
A button.
The screen for verifying
the set date will appear.
If the displayed date and time are correct, use
press the d button to choose "YES", and
then press the A button.
The date and time will be set, and the DVD
video camera/recorder will enter the
recording pause status.
Choosing "NO" will restore the menu screen.
:
Da t e Se t u p
Da t e Se t 9 / 3 0 / 2005
Da t e Mode 8 : 00AM
ENTER RETURN RAM
Da t e Se t
9 / 3 0 / 2005 8 : 0 0AM
Da t e s e t u p?
YES NO
ENTER RAM
37