Electronic Image Stabilizer (Eis) - Hitachi VM-H38A Instruction Manual

ELECTRONIC IMAGE STABILIZER (EIS)

ELECTRONIC IMAGE STABILIZER (EIS)
This function corrects slight shaking of the image in the following record modes.
• Recording by zooming up to a distant subject
• Recording by approaching a small subject.
• Recording while walking around
• Recording in a vehicle or recording a subject behind the window of a vehicle
1. Press the "EIS" button to engage the electronic image stabilizer and to display the EIS
indicator " ".
• Press the button again to switch off this function.
2. Press the start/stop button to start recording
• EIS corrects slight shaking of the image when "
NOTES:
• Shaking of the image appears in the viewfinder with a slight delay.
• EIS may not operate correctly when a wide or teleconverter lens is used.
" is displayed.
30