Selecting Multiple Scenes; Selecting Consecutive Scenes Together - Hitachi DZ-MV730A Instruction Manual

SELECTING MULTIPLE SCENES

1
Press the DISC NAVIGATION button.
2
Use the f/e/d/c buttons to select
the desired scene.
3
Press the SELECT button once:
The selected scene will be framed in red and
yellow.

SELECTING CONSECUTIVE SCENES TOGETHER

1
Press the DISC NAVIGATION button.
2
Use the f/e/d/
c buttons to select the
desired scene.
3
Hold down the
SELECT button for at
least one second:
The selected scene will
be doubly framed in
yellow and blue.
4
Use the f/e/d/
c buttons to select the
last scene in the range
you want, and then
press the A button:
The thumbnails of
scenes in the specified
range will be framed in
red, and then selected.
106
A l l Pr ogr ams 005 / 014
PLAY RAM
Yellow frame
A l l Pr ogr ams 005 / 014
RAM
ENTER CANCEL
Double frames in
yellow and blue
A l l Pr ogr ams 010/ 014
RAM
PLAY DESELECT ALL
Red
frame
When scenes up to
this point are selected
Repeat steps 2 and 3 to randomly select
multiple scenes.
:
Note
• You can know the status of scenes from the colors of
cursor and bargraph:
Cursor Bar graph
Yellow Light blue
Blue Light blue
Red Red
• Pressing the A button after selecting scenes will
play back only the selected scenes from the
beginning of each.
• To cancel a selected scene, select the scene to be
canceled, and then press the SELECT button.
To cancel all selected scenes, press the C button.
• You can also select scenes in reverse from the last
scene in the range.
• To release multiple selection, press the C or SELECT
button before pressing the A button in step 4.
• Up to 999 scenes can be selected for both disc and
card.
Status of scenes
Current cursor position
Range of scenes being
selected
Scenes already selected