Turning Record Led On Or Off (Record Led); Changing Display Language (Language) - Hitachi DZ-MV730A Instruction Manual

Hitachi dz-gx20a / dz-mv730a / dz-mv780a instruction manual
Hide thumbs Also See for DZ-MV730A:
Table of Contents

Advertisement

TURNING RECORD LED ON OR OFF (RECORD LED)

You can switch off the recording indicator on the front of DVD video camera/recorder even during
recording.
Setting
On
Off
1
Press the MENU
button, use "Operating
Menu" (p. 64) to choose
"Record LED" on the
"Initial Setup" menu
screen, and then press
the A button.

CHANGING DISPLAY LANGUAGE (LANGUAGE)

You can change the language used to display the menu and information.
The following shows that English is changed to French.
1
Press the MENU
button, use "Operating
Menu" (p. 64) to choose
"Language" on the
"Initial Setup" menu
screen, and then press
the A button.
2
Select "Français", and
then press the A
button.
The recording indicator will light red to show that the DVD video camera/recorder
is recording.
The recording indicator will not light even during recording.
Recording indicator
I n i t i a l S e t u p
Be e p
Po w e r S a v e
R e c o r d LED
On
Of f
L a n g u a g e
Demo Mode
Reset
ENTER
RETURN
RAM
I n i t i a l Se t up
Be e p
Eng l i sh
Po w e r S a v e
R e c o r d LED
F r ança i s
L an gu age
Español
Demo Mode
Deu t sh
Reset
I t a l i ano
ENTER
RETURN
RAM
Con f i g u r a t i on I n i t i a l e
Be e p
Po w e r S a v e
LED E n r g.
L an gu e
F r ança i s
Mode Démo
Régl Défaut
ENTRER
RETOUR
RAM
Content
2
Select "On" or "Off", and then press the A
button.
3
Press the MENU button to end the setting.
:
Note
• The Record LED setting will not appear in the on-
screen information display.
• The Record LED setting will be stored in memory
even when the DVD video camera/recorder is turned
off.
• Specify "Record LED: Off" when recording a subject
behind a glass or water tank that reflects light: The
reflected light of the recording indicator will not be
recorded.
• Even if "Record LED Off" is specified, the recording
indicator will light while the self-timer is counting
down.
3
Press the MENU button to end the setting.
:
Note
The language setting will be stored in memory even
when the DVD video camera/recorder is turned off.
101

Advertisement

Table of Contents
loading

Table of Contents