OVEN PROBLEM
Range does not function
Heating elements does not
work
Oven light does not work
Igniters does not work
Igniters sparking but no flame
ignition
Igniters spark continuously
after flame ignition
Burner ignites but flame is
large, distorted, or yellow
Oven is not heating
Oven light is not working
properly
Cannot remove lens cover on
light
TROUBLESHOOTING GUIDE
POSSIBLE CAUSES AND/OR REMEDY
Range is not connected to electrical power. Ask a professional to
check power circuit breaker, wiring and fuses.
Temperature setting knob is set a too low temperature, increase it
by turning in clockwise direction .
And/or
Cooling fan system does not operate correctly.
Light bulb is burned out. Range is not connected to power/ clean
is cycle on
Circuit is tripped. Fuse is blown. Range is not connected to power.
Gas supply valve is in "OFF" position. Gas supply is interrupted.
Ignition micro‐switches remain incorrectly engaged; call a
qualified technician for repair.
Burner ports are clogged. Unit is not set to the appropriate gas
type. Call a qualified technician for gas conversion procedure.
Check the circuit breaker or fuse box to your house. Make sure
there is proper electrical power to the oven. Make sure the oven
temperature has been selected.
Replace or reinsert the light bulb if loose or defective.
There may be soil build‐up around the lens cover. Wipe lens cover
area with a clean dry towel prior to attempting to remove the lens
cover.
34