Remote Management Setup; Management Station Ip Settings - D-Link DGS-3308 Series User Manual

The following window is used to set up the static DNS Relay function on the Switch.
Items on the screen above include:
Domain Name – The host name of the IP address, for example, "accounting.dlink".
IP Address – The IP address of the domain name.
State – Toggle to enable or disable this DNS Static Table entry.

Remote Management Setup

Use the five Remote Management Setup windows–which are the same whether the Switch is in Layer 2 mode or Layer 3
mode–to configure the IP addresses of up to 3 Management stations, to configure SNMP Community strings, to enter the
IP addresses of Trap receivers, to create and manage user accounts, and to configure the Serial Port settings.

Management Station IP Settings

You can specify the IP addresses of up to 3 management stations that will be allowed to access the management agent of
the Switch. If you enter IP addresses in this menu, then only management stations with those IP addresses will be allowed
to access the management agent of the switch. All other IP addresses will be blocked.
Figure 7-54. Static DNS Relay Setup screen
188
8-port Gigabit Ethernet Switch User's Guide