D-Link DGS-3308 Series User Manual page 155

8-port Gigabit Ethernet Switch User's Guide
1. Enter the new user name, assign an initial password, and then confirm the new password. Determine whether the
new user should have Root, User+, or User privileges.
2. Click on Apply to make the user addition effective.
3. A listing of all user accounts and access levels is shown on the user accounts control table. This list is updated
when Apply is executed.
4. Please remember that Apply makes changes to the switch configuration for the current session only. All
changes (including User additions or updates) must be entered into non-volatile ram using the Save Changes
command on the Maintenance menu - if you want these changes to be permanent.
Root, User+, and Normal User Privileges
There are three levels of user privileges: Root, User+, and User. Some menu selections available to users with Root
privileges may not be available to those with User+ and User privileges.
The following table summarizes the Root, User+ and User privileges:
Figure 7-3. User Accounts Control Table – Add screen
Switch Configuration
Management
Configuration
Network Monitoring
Community Strings and Trap Stations
Update Firmware and Configuration
Files
System Utilities
Factory Reset
Reboot Switch
User Accounts Management
Add/Update/Delete User Accounts
View User Accounts
Table 7-1. Root, User+, and User Privileges
Privilege
Root User+ User
Yes Read Only
Yes Read Only
Yes Read Only
Yes No
Yes Ping Only
Yes No
Yes Yes
Yes No
Yes No
145
Read Only
Read Only
Read Only
No
Ping Only
No
No
No
No