D-Link DGS-3308 Series User Manual page 98

Toggle the Action:<Add/Modify> field to Add/Modify. Choose a name for the interface to be added and enter it in the
] field. The corresponding VLAN ID must also be entered in the VID:[ ] field. Enter the interface's
Interface Name:[
IP address and subnet mask in the corresponding fields. Toggle the Active:<Yes> field to yes, highlight APPLY and
press enter to make the IP interface effective. Use Save Changes from the Main Menu to enter the changes into NV-
RAM.
Action:<Add/Modify> – This field can be toggled between Add/Modify and Delete using the space bar. This
enables the addition/modification of a new or existing IP interface entry or the deletion of an existing entry.
Interface Name:[
IP Address:[
Subnet Mask:[
Active:<Yes> – Toggled between Yes and No. This entry makes determines whether the interface will be active or
not.
] – Allows the entry of the VLAN ID number for the VLAN the IP interface belongs to. The VLAN must have
VID:[
been previously created.
Press APPLY to make the additions/deletions effective for the current session. To make enter the IP Interfaces into NV-
RAM, use Save Changes from the Main Menu.
Figure 6-34. Setup IP Interface screen
] – Allows the entry of a name for the IP interface. The default IP interface is named "System".
] – The IP address to be assigned to this subnet.
] – The subnet mask to be applied to this subnet. It has the same form as an IP address.
8-port Gigabit Ethernet Switch User's Guide
88