8-port Gigabit Ethernet Switch User's Guide
Figure 6-71. Ping screen
Enter the IP address of the network device to be Pinged and the number of test packets to be sent (3 is usually enough).
Highlight START and press Enter to initiate the Ping program.
Layer 3 Utilities
Layer 3 (IP Routing) switch operation mode adds BOOTP/DHCP Relay and DNS Relay to the utilities available on the
Switch.
BOOTP/DHCP Relay
To enter the IP addresses of BOOTP/DHCP Relay servers, highlight Utilities on the Main Menu and press Enter.
122