Dvmrp Interface Configuration - D-Link DGS-3308 Series User Manual

Robustness Var:[
number of packets. A value between 2 and 255 can be entered, with larger values being specified for subnetworks
that are expected to lose larger numbers of packets
IGMP Static Member Configuration
To c onfigure IGMP static members, highlight IGMP Static Member Configuration on the IP Multicasting
Settings menu and press Enter.
Action:<Add/Modify> – This field can be toggled between Add/Modify and Delete. Add/Modify allows you
to enter a new IGMP Static Member into the table, or to modify an existing entry. Delete allows you to delete an
existing entry.
Interface Name:[ ] – Enter the IP Interface name the IGMP Static Member belongs to in this field.
IGMP Static Group:[ ] – Enter the IP address of the IGMP Static Group in this field.
Group MAC Addr: – Displays the MAC address corresponding to the IGMP Static Group IP address entered
above.
IP Address: – Displays the IP address corresponding to the IP interface entered above.
State:<Enabled> – Can be toggled between Enabled and Disabled.
Total Entries: – Displays the total number of entries into the Switch's IGMP Static Member table.

DVMRP Interface Configuration

To configure DVMRP for an IP interface, highlight DVMPR Interface Configuration from the IP Multicasting
Settings menu and press Enter.
] – This is a tuning variable to allow for subnetworks that are expected to lose a large
Figure 6-43. IGMP Static Member Configuration screen
8-port Gigabit Ethernet Switch User's Guide
96