Removing The Front I/O Panel - Dell Dimension 5150 Service Manual

bottom of the opposite side of the assembly upwards.
6. Slide the fan assembly toward the back of the computer and lift to remove the assembly.
Front I/O Panel
CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the
Product Information Guide.
CAUTION: To guard against electrical shock, always unplug your computer from the electrical outlet before
removing the cover.
NOTICE:
To prevent static damage to components inside your computer, discharge static electricity from your body
before you touch any of your computer's electronic components. You can do so by touching an unpainted metal surface
on the computer chassis.

Removing the Front I/O Panel

1. Follow the procedures in
2. Remove the computer cover.
3. Remove the heat-sink
4. Remove the fan assembly.
1 screw
2 front I/O panel
5. Remove the screw that secures the front I/O panel to the front of the computer.
"Before You Begin."
assembly.