Back View Of Computer - Dell Dimension 5150 Service Manual

1 voltage selection switch See the safety instructions in the Product Information Guide for more information.
2 power connector
3 back panel connectors
4 card slots
1 link integrity
light
2 network adapter To attach your computer to a network or broadband device, connect one
connector end of a network cable to either a network jack or your network or
broadband device. Connect the other end of the network cable to the
network adapter connector on the back panel of your computer. A click
indicates that the network cable has been securely attached.
NOTE:
On computers with a network connector card, use the connector on the
card.
Insert the power cable.
Plug USB, audio, and other devices into the appropriate connector.
Access connectors for any installed PCI and PCI Express cards.
Green — A good connection exists between a 10-Mbps network
and the computer.
Orange — A good connection exists between a 100-Mbps network
and the computer.
Off — The computer is not detecting a physical connection to the
network.
Do not plug a telephone cable into the network connector.