Dell Dimension 5150 Service Manual page 67

NOTE: If you insert a boot device and restart the computer, this option
(Diskette
appears in the system setup menu. To boot from a USB memory device,
drive
default) select the USB device and move it so it becomes the first device in the
list.
Drives
Enables and disables the floppy drives and sets read permission for
the internal floppy drive.
Diskette
Drive
(Internal
default)
NOTE:
floppy drives regardless of this setting.
Enables or disables an ATA or SATA device (such as hard-drive, CD
drive, or DVD drive). On enables the interface so that the device
Drives 0
can be used.
through 3
Displays the Controller type (ATA or SATA), Port number the
(On default)
drive is using, Drive ID number, Capacity, and whether the drive is
controlled by the BIOS.
SATA Operation
Identifies and defines the SATA controller settings for RAID. You
can set the SATA controller to RAID Autodetect/ATA or RAID
(RAID
On.
Autodetect/ATA
default)
Onboard Devices
Enables or disables the integrated NIC controller. Settings are On, Off,
or On w/PXE. When the On w/PXE setting is active (available only
for setting up a future boot process), the computer prompts you to
Integrated
NIC
press <Ctrl><Alt><b>.
Pressing this key combination causes a menu to display that allows you
(On
to select a method for booting from a network server. If a boot routine
default)
is not available from the network server, the computer attempts to boot
from the next device in the boot sequence list.
Integrated
Enables or disables the onboard audio controller.
Audio
Controller
Enables or disables internal USB for FlexBay.
USB for
Flexbay
NOTE:
(On
installed.
default)
Video
Primary
Specifies which video controller is primary when two video controllers are
Video
present on the computer. Auto enables the add-in video controller.
Onboard enables the integrated video controller.
(Auto
default)
Video
Memory
Configures the system memory allocation reserved for the integrated video
Size
controller. Settings are 1MB and 8MB.
(8 MB
default)
Performance
Hyper-
Threading Determines whether the physical processor appears as one or two logical
Off — disables all floppy drives
USB — enables the USB floppy drive
Internal — enables the internal floppy drive
Read Only — enables the internal drive controller and allows
the internal floppy drive read-only permission
Operating systems with USB support will recognize USB
This USB option appears only if a FlexBay device is