Installing the 5.25 ODD bay
1. Place the ODD bracket into the system slot.
2. Replace the (6-32 X 6.0mm) screws.
3. Place the ODD filler back into the slot.
4. Install the:
a.
front bezel
b.
side cover
5. Follow the procedure in
Front input and output panel
Removing front input and output panel
1. Follow the procedure in
2. Remove the:
a.
side cover
b.
front bezel
c.
front input and output bezel
d.
5.25 inch ODD bracket
3. To remove the front input and output(I/O) panel:
a. Disconnect the intrusion switch cable [1], USB 3.1 cable [2], front I/O power cable [3], USB 3.1 cable [4], Speaker cable [5], Audio
cable [6]
40
Removing and installing components
After working inside your computer
Before working inside your
computer.