Replacing The Drive Panel; Removing The Front Panel - Dell Dimension 5150 Service Manual

Replacing the Drive Panel

1. Follow the procedures in
2. Remove the computer cover.
3. If you are installing a replacement drive panel, remove the old
1 sliding plate lever 3 drive panel
2 sliding plate 4 front panel
4. Align the drive panel tabs with the side-door hinges.
5. Rotate the drive panel toward the computer until it snaps into place on the front panel.
Front Panel
CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the
Product Information Guide.
CAUTION: To guard against electrical shock, always unplug your computer from the electrical outlet before
removing the cover.

Removing the Front Panel

"Before You Begin."
drive panel.