NOTE:
Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in
Before working inside your
working inside your
computer. For more safety best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.
Topics:
•
Prerequisites
•
Procedure
Prerequisites
1. Remove the
right-side
cover.
2. Remove the
front
cover.
Procedure
1. Lay the computer on the left side and disconnect the front-audio cable from the system board.
2. Disconnect the USB 2.0 cable from the system board.
3. Disconnect the media-card reader cable from the system board.
4. Disconnect the USB 3.0 cable from the system board.
5. Remove the two screws (M3x5) that secures the front I/O panel to the chassis.
6. Pull out the front I/O panel along with the cables, through the front of the computer.
Removing the front I/O-panel
computer. After working inside your computer, follow the instructions in
Removing the front I/O-panel
21
After
33