Installing The 5.25 Odd Bay; Front Input And Output Panel; Removing Front Input And Output Panel - Dell Precision 5820 Tower Owner's Manual

Installing the 5.25 ODD bay

1. Place the ODD bracket into the system slot.
2. Replace the (6-32 X 6.0mm) screws.
3. Install the:
a. ODD
b. front bezel
c. side cover
4. Follow the procedure in

Front input and output panel

Removing front input and output panel

1. Follow the procedure in
2. Remove the:
a. side cover
b. front bezel
c. front input and output bezel
d. 5.25 inch ODD bracket
3. To remove the front input and output(I/O) panel:
a. Disconnect the intrusion switch cable [1], USB 3.1 cable [2], front I/O power cable [3], USB 3.1 cable [4], Speaker cable
[5], Audio cable [6]
After working inside your computer
Before working inside your computer.
Removing and installing components 43