Schwinn Evolution Owner's Manual page 8

HOW TO USE THE SCHWINN EVOLUTION BIKE
8
Handlebar adjustment
FIG.5
The handlebars may be adjusted to more
accurately simulate the upper body position of
road cycling. Raise or lower the handlebars for a
more efficient, comfortable ride.
1. To raise or lower the handlebars, loosen the
locking pop pin. Pull out the spring-loaded
release knob. This releases the locking pin from
the pre-set handlebar position hole.
2. Raise or lower the handlebars to the desired
position (Fig.5).
3. When the handlebars are in the desired position,
release the spring-loaded knob re-positioning the
locking pin in the desired, pre-set hole. Turn the
handle clockwise to tighten the knob.
4. Try several handlebar settings to find the most
comfortable position.
Foot positioning/pedal strap adjustment
FIG.6
Place the ball of each foot in the toe clip until
the front of the shoe fits snugly in the toe clip
cage. Rotate one foot to within arm's reach,
then tighten the webbed cloth strap of the toe
clip around your shoe by pulling up on the strap.
Pull up on the strap until the cage of the toe clip
fits snugly around the shoe. Repeat for the
other foot. Point your toes and knees directly
forward to ensure maximum pedal efficiency
(FIG. 6).