Attachment : Ascii To Hex Conversion Table - Orion OLM-5510 User Manual

ORION
- Send to MLCD
A. Normalcommand
STX CMD Length
Value 0x02 0x89 0x03
*IDRange(Program):0x01(1)~0xFF(255)
*Control:0x01(1)~0x06(6)
-1:NoGamma,2:Gamma1.5,3:Gamma1.9,4:Gamma2.0,5:Gamma2.2,6:Gamma2.5
B. Broadcastcommand
STX CMD Length
Value 0x02 0x89 0x02
*MakeallLCDdothesameoperation.But,therewillbenoreturncommunication.(Onewaycommand)
- Receive From MLCD
STX CMD Length
Value 0x02 0x89 0x02
*CheckSum:execute"Not"operationafteraddingallthevaluesin"STX~Data"area.
3.24. Factory Data (Picture Control Data)
- Command for loading the Picure Control data (User Mode / White Balance / RGB Data / VIDEO Data) adjusted in
the factory.
- It is usable only at Power on Operative
- It shows the value based on current Color Temp. (Normal Mode / Studio Mode.)
- Data can be checked with "Get Picture Control Data" after executing the command
- CMD : 0x82(Save), 0x83(Load)
- Send to MLCD
STX CMD Length
Value 0x02 Variable 0x02
*IDrange(Program):0x01(1)~0xFF(255)

- Receive from MLCD
STX CMD Length
Value 0x02 Variable 0x02
*IDrange(Program):0x01(1)~0xFF(255)
*CheckSum:Execute"Not"operationafteraddingallthevaluesin"STX~Data"area.
3.25. Get Temperature Status
- Command for acquiring temperature information.
- It is usable only at Power on status.
Data
ETX
ID Master Control
Variable 0x01 Variable 0x03
Data
ETX
ID Control
0X00 Variable 0x03
Data
Check Sum ETX
ID Master
Variable 0x01 Variable 0x03
Data
ETX
ID Master
Variable 0x01 0x03
Data
Check Sum ETX
ID Master
Variable 0x01 Variable 0x03
- 78 -
- Send to MLCD
STX CMD Length
Value 0x02 0x7F 0x02
*IDrange(Program):0x01(1)~0xFF(255)
*Itisnotapplicableas"Broad-cast"command.
- Receive from MLCD
STX CMD Length
Value 0x02 0xF7 0x04
*TemperatureValues(Temp.0,Temp.1)
-0(0x00): 0℃~127(0x7F):127℃
-128(0x80):-1℃~254(0xFE):-127℃
-0xFF:Temp.SensorError
*CheckSum:Execute"Not"operationafteraddingallthevaluesin"STX~Data"area.

※Attachment : ASCII to HEX Conversion Table

STX 02
ETX 03
- 79 -
MLCD
Infinitely Expandable
Data
ETX
ID Master
Variable 0x01 0x03
Data
Check Sum ETX
Tempera-
ID Master
ture Values
Variable 0x01 ... Variable 0x03
Temp.0 Temp.1
Variable Variable