The Use Of Casters - Hill Phoenix ONRB Installation & Operation Handbook

CASES
MOVE ON
CASTERS
FOR EASIER INSTALLATION
ORIGIN 2 cases are manufactured and shipped to
stores with casters installed on the base frame to
make the job of moving cases easier for everyone
involved with the manufacturing, shipping and instal-
lation process.
ROLL OUT OF TRUCK. When there is a truck - level 1
delivery dock, cases may be rolled directly from the
truck to the store floor. [CAUTION] If skid boards are
required to unload cases, casters should be removed
prior to sliding them down the skid; after which they
can be reinstalled on case.
REMOVE COTTER PIN. Removing the casters is 3
easy. Simply flatten and hammer out cotter pins
then lift the case with "J" bar, and the casters will
fall off.
[CAUTION] Make certain hands are out of the way.
Casters not only speed up the process, but they also
reduce the chance of damage from raising and low-
ering cases with "J" bar to place them on dollies,
skates or rollers. In most situations, one or two per-
sons can move the case with ease.
ROLL TO LINEUP POSITION. Casters may remain in
place to move the cases to staging areas around the
store, prior to final installation. When ready for final
line-up, roll the case to set position, then remove
casters.
CASTERS MAY BE DISCARDED.
9
2
4