Cartridge Alignment; Your Name And Number - Philips MF-JET 500 User Manual

1 Open the machine by pulling the lever under
the control panel.
2 Press the lever in the middle of the cartridge
holder to open the holder.
3 Take the ink cartridges out of their packaging
and remove the protective strip.
v Please make sure that the protective strip
was removed completely.
Be careful not to touch the nozzle or the
contacts!
4 Insert the colour cartridge with the contacts
forward and the "nose" down into the left
compartment of the cartridge holder.
5 Insert the black cartridge into the right
compartment. Close the cartridge holder.
You'll hear a click when it snaps home.
6 Close the machine.
7 Insert the chip card "Plug 'n Print" with the
contacts facing up into the slot under the
control panel and confi rm with OK. Remove
the cartridge and repeat the process for the
second cartridge.

Cartridge alignment

1 After inserting the cartridges for the fi rst time,
the machine will print out a page to check
their alignment.
2 Enter the value A where the image is the
clearest.
3 Confi rm with OK and repeat these steps for
values B, C and D.

Your name and number

1 Enter your fax number (max. twenty digits)
and press OK (to enter a plus sign hold down
the CTRL key and press Q; to enter a blank
space, press the _@ key).
2 Enter your name by using the keyboard for
text input (max. twenty characters). You can
also enter a plus sign (CTRL and Q) or a
slash (CTRL and M). Press OK.
VALUE A
VALUE B
9