Table of Contents
Advertisement
2 Press the lever in the middle of the cartridge
holder to open the holder.
3 Take the ink cartridges out of their packaging
and remove the protective strip.
v Please make sure that the protective strip
was removed completely.
Be careful not to touch the nozzle or the
contacts!
4 Insert the black cartridge "nose" down in
the right-hand compartment of the cartridge
holder.
5 Insert the colour cartridge in the same way
in the left-hand compartment.
6 Close the cartridge holder. You'll hear a click
when it snaps shut.
7 Close the machine.
8 Push the supplied " Plug'n'Print" starter card
with the contacts at the top into the slot under
the control panel. This "Plug'n'Print" card is
used for initialising the black cartridge and the
colour cartridge.
9 The cartridge is loaded when the following ap-
pears on the display: Action completed
Repeat the process with the same card for the
second cartridge.
Cartridge alignment
After the ink cartridges have been inserted your
multifunctional machine will print a test page that
will help you align the print heads of the two car-
tridges correctly. This is necessary to achieve the
best possible print quality.
1 Use the number keypad to enter the number
of the fi eld in which the arrow appears clear-
est.
2 Confi rm with OK and repeat these steps for
values B, C and D.
Your number and name
1 Enter your fax number (max. 20 digits) and
press OK (to enter a plus sign hold down
the CTRL key and press Q; to enter a blank
space, press the ½ key).
2 Enter your name by using the keyboard for
text input (max. 20 characters). The available
special characters are shown above the letter
keys on the right and can be entered by hold-
ing down CTRL and pressing the relevant
key. To type capital letters, hold down + and
press the desired key. If you have entered a
wrong digit or character, you can correct it
with / and C. Press OK.
Remove card
enter VALUE A
enter VALUE B
11
Advertisement
Table of Contents
