Table of Contents
Advertisement
FAST—for good quality documents, without
drawings or small details
NORMAL—for documents with drawings or
small characters
QUALITY—for maximal resolution
Press OK.
5 Your MF-jet 500 can reduce or magnify a spe-
cifi c part of a document from 25% to 400%.
Set the desired zoom value with the key pad
and press OK.
6 You can change the origin of the fl at-bed
scanner (by default, this is the back left angle
of the scanner window marked with arrows).
By entering new values of x and y given in
millimetres, you will move the scanning zone
as shown on the fi gure below. Confi rm the
entries with OK.
7 If the document is too light or too dark, you
may change the scanning contrast. Press /
or O as many times as necessary to choose
the desired contrast, as shown by the position
of the cursor. Press OK.
8 You can adjust the saturation. Saturation is
the colourfulness judged in proportion to its
brightness. Use / to change the setting. - is
more grey, + is more saturated. Confi rm with
OK.
9 If you have chosen colour copy, you can
adjust the RGB values. All colours can be
defi ned as combinations of red (R), green (G)
and blue (B). You can change the values for
each of these basic colours with /. Press
OK.
10 You can adjust the luminosity (brightness) of
the printer. Use / to change the setting. - is
darker, + is lighter. Press OK. LUMINOSITY
11 Use / to set whether you use plain, coated,
ZOOMING
or photo paper, or transparent fi lm and press
OK.
ORIGIN
CONTRAST
SATURATION
R.G.B.
»PLAIN PAPER
17
Advertisement
Table of Contents
