Table of Contents
Advertisement
Command Sets for Command Line Interface
86
9. ipatm arpserver
Syntax:
ipatm arpserver [<i/f> [<ATM address>|here]]
Description:
Displays or sets the ATMARP server used for an interface, which
must be an IP-over-ATM interface using SVCs. The interface name is
optional when displaying: if omitted, the ATMARP servers for all
such interfaces are listed. (Since currently there can only be one such
interface, this behavior is present only for possible consistency with
future versions.) The parameter "here" causes no ATMARP server to
be used; only the local ATMARP cache will be consulted when setting
up an SVC. This will normally be used when this machine is the
ATMARP server for the local network.
Configuration saving saves this information.
Example:
DSL> ip ipatm arpserver
ipatm arpserver atm here
DSL> ip ipatm arpserver atm 47.0.83.10.a2.0.0.0.0.0.0.0.0.0.20.2b.4.3.8.0
DSL> ip ipatm arpserver atm
ipatm arpserver atm
47.00.83.10.a2.00.00.00.00.00.00.00.00.00.20.2b.04.03.08.00
10. ipatm files
Syntax:
ipatm files
Description:
Lists the IP-over-ATM connections, listens, and slots for available
connections.
Example:
DSL>
ip ipatm files
i/f atm 0 transmissions queued, 6 free connections, 4
listeners
0: on atm Connected to 192.168.220.48, 2 rx buffers idle 0ms
1: on atm Listening, 1 rx buffers (in use)
2: on atm Listening, 1 rx buffers (in use)
3: on atm Listening, 1 rx buffers (in use)
4: on atm Listening, 1 rx buffers (in use)
5: on atm Idle, 0 rx buffers
6: on atm Idle, 0 rx buffers
7: on atm Idle, 0 rx buffers
8: on atm Idle, 0 rx buffers
9: on atm Idle, 0 rx buffers
10: on atm Idle, 0 rx buffers
Advertisement
Chapters
Table of Contents
