Commands For Adsl Process - Heritage Kayaks Heritage Series User Manual

Command Sets for Command Line Interface
114

Commands for ADSL process

1. show rate
Syntax:
Show rate
Description:
This command displays the channel data of the ADSL link. It will not
return any message if ADSL link is not established yet.
2. show defect
Syntax:
show defect
Description:
This command displays the defects data of the ADSL link. It will not
return any message if ADSL link is not established yet.
3. down
Syntax:
down
Description:
Disable ADSL link
4. gasp
Syntax:
gasp
Description:
Send dying gasp
5. mode glite
Syntax:
mode glite
Description:
Set G.Lite mode
6. mode
Syntax:
mode
Description:
This command displays the current mode of the ADSL link.