Chapter 5 Managing The Adsl Router; Booting The Adsl Router From Ethernet Network - Heritage Kayaks Heritage Series User Manual

Heritage Series ADSL Bridge/ Router
Chapter 5
5.1 Booting the ADSL Router from Ethernet
Network
By default, the Router is configured to boot from the on-board flash
memory. But it is possible boot via Ethernet network as well. The
executable image is stored in the local PC and is downloaded to the Router
via Ethernet network upon every reset. For this, the Router needs to be
configured and also a TFTP/BOOTP utility needs to be installed on the
local PC.
Router Configuration
Turn off the Router and turn it on again
Keep the
At the '
Boot from Ethernet, USB or Flash? (E/U/F)
prompt type
Local PC Configuration
To download the software you need a TFTP/BOOTP server.
You can use any. Be aware that every time the board is restarted
the image will be transferred from the local PC to the Router.
Managing The ADSL Router
Managing The ADSL
Router
key be pressed
*
↵
E
55
'