Heritage Kayaks Heritage Series User Manual page 57

52
• PPTP dial in
In the following example, the PC connects to the ADSL Router firstly must
be configured as:
IP address of PNS
Subnet mask of PNS
Gateway of PNS
IP address of PAC
> ip device add Ethernet ether //edd 192.168.10.2 ↵
> config save ↵
> restart ↵
> ppp 2 pvc 0 32 listen ↵
(Set channel 2 to VPI=0, VCI=32)
> ppp 2 interface 0 ↵
> ppp 2 tunnel 1 pptp in ↵
> ppp 2 enable ↵
> pptp bind 192.168.10.2 ↵
> pptp 1 create 192.168.10.1 ↵
> config save ↵
> restart ↵
The PPTP configuration can be removed by following procedure. Please
ensure to remove the PPTP configuration before set the ADSL modem to
other configuration
• Remove PPTP either dial out or dial in
> ip device flush ↵
> config save ↵
> restart ↵
> ppp 2 pvc none ↵
> ppp 2 interface 0 ↵
> ppp 2 tunnel 0 ↵
> ppp 2 disable ↵
> pptp 1 delete ↵
Advanced Configurations
: 192.168.10.1
: 255.255.255.0
: 192.168.10.2
: 192.168.10.2