Device List - Heritage Kayaks Heritage Series User Manual

Command Sets for Command Line Interface
68

3. device list

Syntax:
device list
Description:
This command lists all the devices that are currently attached to the
bridge. It does not show the stored configuration (which can be seen
with the
config print
Example:
DSL bridge> device list
4. ethertype
Syntax:
ethertype [<port> any|ip|pppoe]
Description:
This command enables filtering of Ethernet packets according to the
field in the header. Only packets of the type specified
ETHER_TYPE
using this command will be sent on the port specified; packets of all
types will always be received. By default, all bridge ports are set to
"any", which means that the type of the packet will never be checked.
The meaning of the other options is as follows:
Option Permitted ETHER_TYPE values
"ip" 0x0800
0x0806
"pppoe" 0x8863, 0x8864
The port is specified as an integer, as displayed by the
command. When using this command in the
configuration file, ports are numbered in the order in which the
commands are given, starting from 1.
device add
If no arguments are given, the current settings for each port are
displayed.
Example:
DSL bridge> ethertype 2 any
command).
– IP
– ARP
– PPP Over Ethernet (RFC 2516)
initbridge
device list