Using Terminal Program Via Serial Console Port - Heritage Kayaks Heritage Series User Manual

Heritage Series ADSL Bridge/ Router
Installing and Configuring your ADSL Router
4. Then you will see the following prompt, DSL > ("DSL" for
example in here, instead of your ADSL Router's Model).
5. Now you are ready to configure the Router by using command.
Please contact your ISP/NSP to obtain the detail command sets of
your Router. If the Router does not return any message, refer to
Appendix B for troubleshooting information.

2.4.2 Using terminal program via serial console port

A terminal can be connected directly to the Serial console port. This
requires the use of a terminal emulation software package such as
Microsoft HyperTerminal. By default setting, the Router is configured to
communicate at a baud rate of 9600. Any standard terminal that support
baud rate of 9600 can be connected to the Router's console port. Please
configure your serial port as:
BPS :
Data bits :
Parity
Stop Bits :
Flow Control :
Following steps provide the instructions to log on to the Router via
Microsoft HyperTerminal.
1. Select Start->Programs->Accessories->HyperTerminal
9600
8
: None
1
None
23