Bridged Rfc1483; Ethernet Port - Heritage Kayaks Heritage Series User Manual

Heritage Series ADSL Bridge/ Router

3.2 Bridged RFC1483

(Default configuration for Router)
[System configuration]
192.168.7.2
[ISP/DSLAM configuration]
IP address :
Subnet mask :
Gateway :
[Local PC configuration]
IP address :
Subnet mask :
Gateway :
The Router already default to support the RFC 1483. However, you can use
following procedure to reconfigure the Router to support the RFC 1483
again.
> ip device flush
> bridge device add edd
> bridge device add bun/port=r1483/rfc1483=true/mode=<x>/
txvpi=<y>/txvci=<z>/rxvpi=<y>/rxvci=<z>
(<x> is the encapsulation mode of RFC1483, it can be one of LlcBridged and
VcMuxBridged, and the setting of encapsulation mode is case sensitivity. <y> is
the VPI value, and <z> is the VCI value)
> config save
> restart
Basic Configurations

Ethernet Port

192.168.7.3
255.255.255.0
None
192.168.7.2
255.255.255.0
None
29
10Base-T Port
192.168.7.1
//r1483
DSLAM/NSP
192.168.7.3
//
r1483