Chapter 7 Command Sets For Command Line Interface; Command Line Interface Conventions - Heritage Kayaks Heritage Series User Manual

Heritage Series ADSL Bridge/ Router
Command Sets for Command Line Interface
Chapter 7

Command line interface conventions

Command line length may be up to 90 characters long.
The command line interface is case-sensitive
Parameters in between [ and ] are optional
Parameters in between < and > must be entered
The command line interface prompts for commands with a prompt
that indicates the identity of the system. It determines how to
indicate the identity as follows :
If the SNMP MIB variable sysName.0 exists and is
non-empty, that is used first;
Otherwise, if a local IP address exists, that is used;
Otherwise, the local MAC address is used.
For example, the prompt might look like one of the following
DSL>
192.168.7.1>
0:30:eb:ff:0:ff>
Command Sets for
Command Line
Interface
61