Changing Dhcp Server Configuration - Heritage Kayaks Heritage Series User Manual

46

4.3 Changing DHCP server configuration

DHCP is used to acquire IP addresses and options (such as the subnet
mask, DNS, gateway, etc.) automatically. On the practical level, acquiring
these initialization parameters with DHCP translates into avoiding the
more involved Router/PC process (reconfiguration of Router and/or PC
addresses in the same network.
[System configuration]
PC 1
202.1.136.1
PC N
202.1.136.100
[ISP/DSLAM configuration]
IP address :
Subnet mask :
Gateway :
[Local PC configuration]
IP address :
Subnet mask :
Gateway :
By default, the ADSL Router is configured as a DHCP server with the
following settings :
% Do not allocate dynamic IP addresses to unknown clients
deny unknown-clients;
% Do not repond to BOOTP queries
deny bootp;
Advanced Configurations
Ethernet Port
HUB
192.168.102.3
255.255.255.0
None
None (obtained by DHCP)
None (obtained by DHCP)
None (obtained by DHCP)
10Base-T Port
202.1.136.254
Up-Link
192.168.102.3
DSLAM/NSP
192.168
.102.2