Charge The Battery - Kärcher WV 50 Operator's Manual

Assemble the appliance
 Place the attachment on the suction
head with the removable lips until you
hear it lock in.

Charge the battery

 Insert the charger delivered with the ap-
pliance into a proper socket.
 Insert the charging cable plug to the
back of the appliance.
Note: During the charging process, the
charge/operating display blinks. Once the
battery is fully charged, it will be perma-
nently illuminated.
Recharge the battery after finishing
your work.
Start working
 Apply conventional window cleaner to
cleaning area.
 Switch the appliance on, the charge/op-
erations display will illuminate.
 Pull the appliance from the top to the
bottom to vacuum up the cleaning solu-
tion residue.
Note: Hard to reach areas can be vacu-
umed vertically or horizontally (limited are-
as).
Notes:
If the accumulator is low, the charging /
power indicator starts flashing slowly and
the appliance switches off after a certain
time. If this is the case, charge the accumu-
lator.
Switch the appliance off after each cleaned
surface. This will increase your operating
time per battery charge.
Interrupting the work
 Set the appliance on the support leg
(parking position) and switch it off.
English 5