Changing The Battery - Kärcher VC 6300 Instructions Manual

Change the HEPA-filter
Order no. 6.414-805
Filter for pure blower air.
HEPA filter: Change once a year.
Illustration
Open cover.
Unlock the HEPA filter and remove.
Illustration
Insert the new HEPA filter and click it into
place.
Close the lid.
Cleaning of the ComfoGlide nozzle
The ComfoGlide nozzle must be cleaned
regularly!
Remove the nozzle from the suction
pipe.
Illustration
Clean the back steering roller:
The easiest way to do this, is to remove
the roller. Unscrew the axle and pull out.
Dust fluff, hair etc. can now be removed
easily. Fit the steering roller back into
place.
Voltage
Current type
Power protection, min.
Output P
nom
Output P
max
Weight
(without accessories)
Action radius
Dimensions
Nominal width, acces-
sories
Subject to technical modifications!
Specifications
V 220 - 240
Hz 50/60
A 16
W 1800
W 2000
kg 7,0
m 10
mm ø 380 x 380
mm 35
Cleaning the accessories
Illustration
Handle and suction tube can be discon-
nected in order to clean or if clogged.
Push the 2 interlocks and pull apart.
Connect handle and suction tube and in-
sert.

Changing the battery

Note: The battery should not be empty if you
want to ensure cable-free transmission.
Please replace the battery if you see no re-
action or just inadequate reaction when you
press the keys.
Slide and remove the battery compart-
ment cover.
Remove old batteries and dispose them
off properly.
Insert new batteries; pay attention to cor-
rect polarity.
Replace the battery compartment cover
and close it.
11
English