Chapter 6. Error Codes - Kanguru U2-DVDDUPE-S User Manual

Error Codes

Chapter 6. Error Codes

The following tables provide a description of the error codes and the recommend solution:
Error
Error Message
Code
41
Source Disc
200
Empty
201 Bad Master
202 No Targets!
Burner Mixed or
203 Firmware version
Mixed
Targets & Master
204
Not Compatible!
Description & Recommended Solutions
Description:
Read errors exceed the specified limit
Possible Solution:
Replace with new master OR change Read Retries setting in
Setup menu.
Description:
The intended master disc is detected and identified successfully,
but it is a blank disc.
Possible Solution:
Please double check the master disc to ensure it contains data.
Description:
The master disc is detected but cannot be identified within 3
minutes.
Possible Solution:
Please check the master disc for quality, defects or errors.
Description:
The blank disc(s) are missing when the job starts.
Possible Solution:
Please make sure blank discs are placed in Writer trays.
Description:
The model or firmware version of the writers in the duplicator is
not the same.
Possible Solution:
This typically happens when you have recently replaced a Writer
drive. Contact Tech Support.
Description:
The master disc and targets (blanks) are not of the same format.
The Kanguru Duplicator can't cross copy across different media
formats.
Possible Solution:
Please go to Disc Info in the Advanced Setup menu to make
sure the master disc and the blank discs are the same format (see
section "3.13.14.1 Disc Info" on page 44).
62