Skip Read Error; No Capacity Check; Hpa Check - Kanguru kclone-5hd-twr User Manual

Skip Read Error / No Capacity Check / HPA Check

4.5 Skip read Error

The SKIP READ ERROR option allows you to enable or disable error skipping during BRIEF,
RESIZE and DISK copy operations.
Press the ENT button to change this option.
• [ ] – Disabled (default). When an error is detected while reading from the Source, the duplicator
will terminate the current process.
‫٭‬
• [ ] – Enabled. When an error is detected while reading from the Source, the duplicator will
skip the bad sector on the Source and fill it with a zero on the Target and attempt to continue
with the current process.

4.6 No Capacity Check

The NO CAP CHECK option allows you to enable or disable the duplicator's ability to check the
capacity of the Master hard drive and the Target hard drive(s) prior to Brief and Disk Copy processes
and determine whether the drives' capacities are the same.
Press the ENT button to change this option.
• [ ] – No Capacity Check is disabled (default). Prior to a Brief or Disk Copy process is
performed the system will check the capacity between the Master and Target hard drive(s)
to determine whether the capacity is the same. If the capacity is different the process will be
cancelled.
‫٭‬
• [ ] – No Capacity Check is enabled. When a Full or Brief copy process is executed the system
will not check the capacity between the Master and Target hard drive(s) and start the copy
process regardless whether they have different capacities.

4.7 hPa Check

The Host Protected Area (HPA), sometimes referred to as the Hidden Protected Area, is a partition on
the hard drive that is not normally visible to an operating system.
Press the ENT button to change this option.
• [ ‫٭‬ ] – HPA Check is enabled (default). When HPA CHECK is enabled the duplicator will
support Host Protected Areas. When you duplicate a Master drive that contains HPA, the system
will detect the HPA partition, unlock it, copy the area and then re-lock the area once duplication
is complete.
• [ ] – HPA Check is disabled. The system will not check for HPA partitions. Drives that contain
HPA may not duplicate successfully.
21