Kanguru U2-DVDDUPE-S User Manual page 19

Compare
After 2 to 5 seconds of processing time, the Compare Progress screen will appear.
Comparing...
0 10%
5. Once the Compare process has been completed, you will see the following screen.
Pass 7 Fail 0
Waiting for Discs
The successful copies will be ejected. Remove the successful copies, refill the trays with blank media and
press the ENT button to continue comparing another round of copies. Any discs that fail to compare will
not be ejected automatically. You will need to manually eject them and throw them away if they are single
recording discs. Empty drives will also not be ejected automatically.
6. Terminate the current job.
a) If you have finished comparing copies, press the ESC button to terminate the current project and
exit to the Main Menu.
b) If you specified a Counter, once you see the following screen indicating that the specified Counter
value has been reached, you can then press the ENT button to exit to the Main Menu.
Pass 21 Fail 0
Job Completed! Press ENT to Finish
Note: It is normal to see the progress indicator stay at 0-10%
4012MB
and 100% for approximately 30 seconds to one minute for
401MB
duplication. That is caused by the initializing and finalizing
stages.
• PASS 7 - number of discs successfully copied.
( 7)
• FAIL 0 - number of discs that failed.
• ( 7 ) - number of compared discs for this job so far.
19