Kanguru U2-DVDDUPE-S User Manual page 17

Copy
4. Insert discs into the drives.
After you've loaded the drives with discs, close the trays and allow 5 - 10 seconds for the system to detect
them. If either of the preparation screens are displayed for more than 2 minutes after you have inserted your
discs, please check the quality of the discs.
Once all the discs have been recognized, you will see the Confirmation screen.
Preparing :
7 Discs Detected : Go?
Preparing...
Please Wait
After 2 to 5 seconds of processing time, the Copy Progress screen will appear.
Copying...
0 10%
6. Once the Copy process has been completed, you will see the following screen.
Pass 7 Fail 0
Waiting for Blanks
The successful copies will be ejected. Remove the successful copies, refill the trays with blank media and
press the ENT button to continue making another round of copies. Any discs that fail to copy (bad copy)
will not be ejected automatically. You will need to manually eject them and throw them away if they are
single recording discs. Empty drives will also not be ejected automatically.
7. Terminate the current job.
a) If you have finished making copies, press the ESC button to terminate the current duplication
project and exit to the Main Menu.
b) If you specified a Counter, once you see the following screen indicating that the specified Counter
value has been reached, you can then press the ENT button to exit to the Main Menu.
Pass 21 Fail 0
Job Completed! Press ENT to Finish
Note: The "7" indicates that there are seven discs recognized
by the Writers. The actual quantity may be different
depending on the number of discs you have inserted.
5. When the number of discs detected matches the number
of blank discs you inserted, press the ENT button. You
will see the Processing screen.
Note: It is normal to see the progress indicator stay at 0-10%
4012MB
and 100% for approximately 30 seconds to one minute for
401MB
duplication. That is caused by the initializing and finalizing
stages.
• PASS 7 - number of discs successfully copied.
( 7)
• FAIL 0 - number of discs that failed to copy.
• ( 7 ) - number of copies made for this job so far.
17