D Received Message Selection - Icom IF1721/D Instruction Manual

D Received message selection
The transceiver memorizes the received message in the
memory. Up to 6 messages for status and SDM, or 95 charac-
ter SDM's can be memorized. The oldest message is erased
when the 7th message is received. However, once the trans-
ceiver is powered OFF, all messages are cleared.
Push [P1] (Digital) for 1 sec.
q
• Displays queue memory.
Push [P1] (Digital) momentarily.
w
• Displays message memory.
When a message is available
M E S S A G E
- M S G !
When no message is available
M E S S A G E
- N O
Push [Up] or [Down], or rotate [DIAL] to select the desired
e
message.
• When selecting the SDM that includes more than 12 characters,
the message scrolls automatically when the automatic scroll
function is activated.
• Push [Status Up]/[Status Down] to scroll the message manually.
-
M S G -
Push [P1] (Digital) for 1 sec. again to return to the standby
r
condition.
• When no operation is performed for 30 sec., the transceiver re-
turns to the standby condition automatically.
3
BIIS OPERATION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
20