Table of Contents
Advertisement
1
PANEL DESCRIPTION
USER SET MODE KEY
Push and hold to enter the User Set mode.
➥
• During the User Set mode, push this key to select an item, and
change the value or condition using push [CH Up]/[CH Down].
Push and hold this key again to exit the User Set mode.
➥
OPT 1/2/3 KEYS
Push to control the output signal level from the optional unit
connector.
DIGITAL BUTTON KEY (BIIS operation only)
Push to select the call ID list, transmit message and
➥
standby condition. Toggles between queue channel and
received message record indication after queue channel
is selected.
Push and hold to select queue channel indication.
➥
✩ STATUS UP/DOWN KEYS (BIIS operation only)
While in the standby condition, push (or rotate)* to display
➥
the transmit status indication and select a status number.
When a received SDM is displayed, push (or rotate)* to
➥
cancel the automatic scroll and scroll the message manu-
ally.
When an SDM that contains more than 12 characters is
➥
displayed, push (or rotate)* to scroll the message manu-
ally.
* Rotate when this function is assigned to [DIAL].
7
TONE/NAC CH SELECT KEY
(LMR (P25 Conventional) operation only)
While in the analog mode operation, push to select the
➥
continuous tone channel using [CH Up] or [CH Down] to
change the tone frequency/code setting.
While in the digital mode operation, push to select the
➥
NAC channel using [CH Up] or [CH Down] to change the
NAC code setting.
While in the mixed (digital and analog) mode operation,
➥
push to select the continuous tone channel using [CH Up]
or [CH Down] to change the tone frequency/code setting.
Then push this key to enter the setting. After that, the NAC
channel selection screen appears. Select the NAC chan-
nel using [CH Up] or [CH Down] to change the NAC code
setting. Then push this key to enter the setting.
Advertisement
Table of Contents
