Transmitting An Sdm (Short Data Message) - Icom IF1721/D Instruction Manual

Transmitting an SDM
■
D General
The short data message, SDM, can be sent to an individual
station or group stations. Also, 8 SDM memory channels are
available and the messages can be edited via PC program-
ming.
(Short Data Message)
D Transmitting an SDM
While in the standby condition, push [P1] (Digital), then
q
push [Up] or [Down] or rotate [DIAL] to select the desired
station/group code.
Push [P1] (Digital) again, then push [Up] or [Down] or ro-
w
tate [DIAL] to select the desired SDM.
Or, you can select the desired SDM using [Status Up]/
[Status Down] key directly.
Push [P0] (Call) or [PTT]* to transmit the SDM to the se-
e
lected station/group.
*PTT call can be made only when PTT call capability is permitted.
• 2 beeps will sound and the transceiver returns to the standby
condition automatically when the transmission is successful.
BIIS OPERATION
M E S S A G E 1
S D M 1
SDM is displayed.
3
1
2
3
4
5
6
7
Appears
8
9
10
11
12
13
14
15
16
22