Table of Contents
Advertisement
Quick Links
Model: SFE-ST
INSTALLER/CONSUMER SAFETY
INFORMATION
PLEASE READ THIS MANUAL BEFORE
INSTALLING AND USING APPLIANCE.
WARNING!
IF THE INFORMATION IN THIS
MANUAL IS NOT FOLLOWED
EXACTLY, AN ELECTRICAL SHOCK
OR FIRE MAY RESULT, CAUSING
PROPERTY DAMAGE, PERSONAL
INJURY OR LOSS OF LIFE.
FOR YOUR SAFETY
SERVICE MUST BE PERFORMED BY
A QUALIFIED SERVICE AGENCY.
DO NOT STORE OR USE GASOLINE
OR OTHER FLAMMABLE VAPORS
AND LIQUIDS IN THE VICINITY OF
THIS OR ANY OTHER APPLIANCE.
INSTALLER: DO NOT DISCARD THIS MANUAL -- LEAVE FOR HOME OWNER
1
US
C
ANSI / UL1598-2004
Hearth & Home Technologies Inc. • SFE-ST • 4050-510 Rev A • 05/08
BUILDER BOX
TUV Listed as SFE-ST
Homeowner's Installation & Operating Manual
Note: The device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including
interference that may cause undesired operation.
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Hearth and Home Technologies Simplifyre SFE-ST
Summary of Contents for Hearth and Home Technologies Simplifyre SFE-ST
-
Page 1: For Your Safety
Model: SFE-ST BUILDER BOX INSTALLER/CONSUMER SAFETY INFORMATION PLEASE READ THIS MANUAL BEFORE INSTALLING AND USING APPLIANCE. WARNING! IF THE INFORMATION IN THIS MANUAL IS NOT FOLLOWED EXACTLY, AN ELECTRICAL SHOCK OR FIRE MAY RESULT, CAUSING PROPERTY DAMAGE, PERSONAL INJURY OR LOSS OF LIFE. FOR YOUR SAFETY TUV Listed as SFE-ST SERVICE MUST BE PERFORMED BY... -
Page 2: Table Of Contents
Congratulations! Congratulations on selecting a Simplifyre electric replace. This owner’s manual should be retained for future reference. The unit you have selected is designed to provide the utmost We suggest you keep it with your other important documents in safety, reliability and ef ciency. and product manuals. -
Page 3: A. Unpacking
Important Instructions A. Unpacking WARNING! Risk of Fire! Remove the carton and retain the remote transmitter and DO NOT: installation document located in the top foam. • install or operate damaged appliance The retaining brackets holding the front doors must be •... -
Page 4: D. Framing
D. Framing E. Hardwire Electrical Connections • Choose an appliance location and frame as shown WARNING! Electrical wiring must comply with local below. building codes and other applicable regulations to • It is important to allow for nished face when setting the reduce the risk of re, electrical shock and injury. -
Page 5: Hearth & Home Technologies Inc. • Sfe-St • 4050-510 Rev A
SFE-ST WIRING DIAGRAM HOT_LINE POWER SUPPLY GROUND OUTPUT NEUTRAL 12 VDC 1.5 AMP INPUT 120 VOLT 60 HZ LED EMBER MOTION CIRCUIT 25 WATTS MAX FIXED EMBER BED AND BACK LOG LEDS 5 WATT LED FLAME EFFECT PROJECTOR 1 1N4001 EMBER MOTOR OPTIONAL WSK-21... -
Page 6: A. Remote Control
OPERATING INSTRUCTIONS Ensure the appliance is connected to a properly grounded electrical outlet. If a new outlet is required, it should be installed by a quali ed electrician according to applicable building codes. A. Remote Control Note: If the appliance does not respond to the hand held control see “Remote Control Initialization” below. This equipment has been tested and found to comply with the limits for class B digital device, pursuant to Part 15 of the FCC Rules. -
Page 7: A. Replacing The Light Bulb
Service Instructions WARNING! Disconnect power at circuit breaker before B. Screen Cleaning attempting any maintenance or cleaning to reduce the During shipment, installation, handling, etc., the screen risk of re, electrical shock or personal injury. surface may collect dust particles; these can be removed by lightly wiping with a clean, dry cloth. - Page 8 Warranty Warranty Hearth & Home Technologies Inc. (HHT) Electric Fireplaces are tested and inspected prior to shipment and are guaranteed from defect to the purchaser of each new product. Any part which proves to be defective in material or workmanship under normal use within one year will be repaired or replaced without charge.* The Company will not be responsible for any expense incurred for installation, removal from service, or transportation costs.
Need help?
Do you have a question about the Simplifyre SFE-ST and is the answer not in the manual?
Questions and answers