Follett HCC700A Operation And Service Manual page 23

6. Install main housing:
§ Slide main housing onto auger shaft (Fig. 27.1).
§ Install main housing insulation (Fig. 27.2).
§ Use an allen wrench to install 3/16" allen screws (3)
(Fig. 27.3).
7. Apply a coat of petrol-gel to the auger shaft.
8. Install gear motor:
§ Install main housing insulation (Fig. 28.1).
§ Slide gear motor onto the auger shaft (Fig. 28.2).
§ Install two 1/2" bolts (Fig. 28.3).
9. Use screwdriver to orient auger shaft to align with
motor shaft keyway (Fig. 29.1).
10. Install key into keyway (Fig. 29.2).
11. Install spacer, ensure that key is captured in slot
(Fig. 30.1)
Fig. 27
1
3
3
3
Fig. 28
2
3
3
Fig. 29
Fig. 30
1
23
2
1
2
1