Impex IRON GRIP STRENGTH TSA-9900 Owner's Manual page 29

STEP 17 (See Diagram 17)
A.) Place a Seat Pad (#42) onto the Seat Incline Adjustment Frame (#27). Secure it with two M8 x
1 5/8" Allen Bolts (#104) and
the Left Seat Support (#11). Use a Lock Knob (#68) to secure the Seat at selected height.
B.) Insert two Foam Tubes (#13) halfway through the holes on the Right Seat Support (#10) and
the Leg Developer (#26). Push four Vinyl Foam Rolls (#58) onto the Tubes from both ends.
Plug four Foam Roll End Caps (#69) into the ends.
C.) Connect the Arm Curl Handle (#56) to the 146" Lower Cable (#35) with one Long Chain (#90)
and two C-clips (#89).
D.) Connect the Lat Bar (#48) to the 102" Upper Cable (#36) with one Short Chain (#88), and two
C-clips (#89).
E.) Cover the Weight Plates with four Weight Stack Covers (#30). Secure each Weight Stack
Cover with two M10 x 5/8" Allen Bolts (#93) and Ø ¾" Washers (#109).
5/8" Washers (#108). Insert the Frame into the opening on
28