Impex IRON GRIP STRENGTH TSA-9900 Owner's Manual page 30

STEP 18 (See Diagram 18)
A.) Attach the Backrest Board (#41) to the Right & Left Vertical Frames (#5 & #6). Secure each
Board with two M8 x 2 ½" Allen Bolts (#103) and Ø 5/8" Washers (#108).
B.) Attach the Power Station Backrest Board (#44) to the Power Station Vertical Frame (#7).
Secure it with two M8 x 2 ½" Allen Bolts (#103) and Ø 5/8" Washers (#108).
C.) Place the Seat (#42) onto the Right Seat Support (#10). Secure it with two M8 x 2 ½" Allen
Bolts (#103) and Ø 5/8" Washers (#108).
D.) Attach four Arm Pads (#43) to the Right and Left Butterfly (#15 & #14) and Dip Supports (#19
& #20). Secure each Arm Pad with two M8 x 2 ½" Allen Bolts (#103) and Ø 5/8" Washers
(#108).
E.) To maximize the performance of the gym, it is recommended to use light lubricant such as
WD-40 on the four chrome Guide Rods, which the weight plates slide up and down on, to
minimize friction.
29
DIAGRAM 18