Impex IRON GRIP STRENGTH TSA-9900 Owner's Manual page 13

STEP 6 (See Diagram 6)
A.) Securely tighten all Nuts and Bolts previously installed.
B.) Attach the Right Seat Support (#10) to the Right Base Frame (#1). Secure it with one
M10 x 2 ½" Carriage Bolt (#98), Ø ¾" Washer (#109), and M10 Aircraft Nut (#106).
C.) Attach the Right Seat Support (#10) to the Right Vertical Frame (#5). Secure it with
two M10 x 2 ½" Carriage Bolts (#98), one 4 3/8" x 1 ¾" Bracket (#84), two Ø ¾"
Washers (#109), and two M10 Aircraft Nuts (#106).
D.) Attach the Leg Developer (#26) to the bracket on the Right Seat Support. Secure it
with a M10 x 2 7/8" Allen Bolt (#92), two Ø ¾" Washers (#109), and one M10 Aircraft
Nut (#106). Do not over tighten the Nut and Bolt. Make sure the Leg Developer is able
to swivel.
E.) Attach the Butterfly Support Frame (#12) and the Butterfly Pulley Support (#46) to the
Right Vertical Frame. Align the holes and secure them together with two M10 x 2 ½"
Carriage Bolts (#98), Ø ¾" Washers (#109), and M10 Aircraft Nuts (#106).
F.) Attach two Swivel Pulley Brackets (#49) to the Butterfly Pulley Support (#46). Secure
each Bracket with one M12 x 4 3/8" Hex Bolt (#101), two Ø 1" Washers (#110), and
one M12 Aircraft Nut (#107). Do not over tighten the Nut and Bolt. Make sure each
Bracket is able to swivel.
12