Impex IRON GRIP STRENGTH TSA-9900 Owner's Manual page 18

STEP 10 (See Diagram 10)
A.) Attach the Vertical Press Base (#23) to the pivot on the Power Station Vertical Frame (#7).
Secure it with one Axle (#59), two Ø ¾" Washers (#109), and two M10 Aircraft Nuts (#106).
B.) Attach one Vertical Press Arm (#24) to the Vertical Press Base. Secure it with two M10 x 2
½" Carriage Bolts (#98), Ø ¾" Washers (#109), and M10 Aircraft Nuts (#106).
C.) Repeat the same procedure to install the other Vertical Press Arm.
17
DIAGRAM 10