Impex IRON GRIP STRENGTH TSA-9900 Owner's Manual page 12

STEP 5 (See Diagram 5)
A.) Do not tighten all Nuts and Bolts in this step until instructed to do so.
B.) Place the Upper Frame (#8) onto the Right Vertical Frame (#5) and two Guide Rods (#4).
Secure the Upper Frame to the Right Vertical Frame with two M10 x 2 ½" Carriage Bolts (#98),
one 4 3/8" x 1 ¾" Bracket (#84), two Ø ¾" Washers (#109), and two M10 Aircraft Nuts (#106).
C.) Secure the Upper Frame to the two Guide Rods with two M10 x 1" Allen Bolts (#94) and Ø ¾"
Washers (#109).
D.) Place the Top Socket Assembly (#9) onto the two Guide Rods on the rear. Secure them with
two M10 x 1" Allen Bolts (#94) and Ø ¾" Washers (#109).
E.) Connect the Top Socket Assembly (#9), Power Station Vertical Frame (#7), Upper Frame (#8)
and Left Vertical Frame (#6) together. Align the holes and secure them with two M10 x 2 ½"
Carriage Bolts (#98), Ø ¾" Washers (#109), and M10 Aircraft Nuts (#106).
11