Impex IRON GRIP STRENGTH TSA-9900 Owner's Manual page 17

STEP 9 (See Diagram 9)
A.) Insert the axle on the Right Butterfly (#15) through a Butterfly Adjustment Frame (#50) into
the Butterfly Support Frame (#12). Secure it with one M10 x 5/8" Allen Bolt (#93), Ø ¾"
Washer (#109), and Lock Ring (#33).
B.) Thread a T-shaped Pull Pin (#66) into the hole on the Right Butterfly from the bottom. Use
the Pin to adjust the Butterfly position.
C.) Repeat the same procedures A & B above to install the Left Butterfly (#14).
D.) Attach the Front Press Base (#29) to the Right Base Frame (#1). Secure it with one Axle
(#59), two Ø ¾" Washers (#109), and two M10 Aircraft Nuts (#106).
E.) Place the Front Press (#16) onto the Front Press Base. Secure it with four M10 x 2 ¾"
Carriage Bolts (#97), Ø ¾" Washers (#109), and M10 Aircraft Nuts (#106).
16
DIAGRAM 9