Dimensions And Clearances - Follett HCE1000A Operation And Service Manual

Dimensions and clearances

Entire front of ice machine must be clear of obstructions/connections to allow removal.
1" (26mm) clearance above ice machine for service.
1" (26mm) minimum clearance on sides.
The intake and exhaust air grilles must provide at least 150 sq in (968 sq cm) of open area.
Air-cooled model ice machines – 18" (458mm) minimum clearance between discharge and air intake-grilles.
• Keep ventilation openings in the appliance enclosure or built-in structure, clear of obstruction
Front View
Air intake
CAUTION
Side View
21.28" (541mm)
23.50"
(597mm)
Easton Pennsylvania
CORPORATION
MODEL SERIAL NO PART NO
FULL LOAD AMPS VOLTS HZ SINGLE
PHASE
MOTOR COMPRESSOR THERMALLY PROTECTED
REFRIGERANT CHARGE OZ
DESIGN PRESSURE HIGH SIDE LOW SIDE PSIG
208264
Stock Module Identification Plate MIN. BRANCH CIRCUIT AMPACITY AMPS U L U L
Module No. NSF MADE IN THE USA
MAX. BRANCH CIRCUIT FUSE SIZE AMPS R R
Product C
Service No.
21.05" (535mm)
23.77" (604mm)
6
Ice transport hose connection
Air exhaust
both sides
Cord only
15.56"
(396mm)
6.95"
(177mm)
2.53"
(65mm)
1/4" FPT condensor drain
(water-cooled only)
1/4" FPT condensor inlet
(water-cooled only)
Back View
Air exhaust
29.63" (753mm)
2.43" (62mm)
3/8" OD push-in water inlet
3/4" MPT drain